Get cheap Geotagger N3-c GPS Unit for Nikon Camera D600, D7000, D3200, D5100, D5000, D3100 and Coolpix P7700
- Photo GPS with fixed spiral cable
- MTK3329 Chipset obtains quick GPS signals
- 3-axis E-compass
- Power from Nikon camera directly, simple to use
- Unique “wake up and sleep” work mode to save battery
Product Description
Geotagger N3 is a brand new photo-GPS unit which is especially made for Nikon DSLR cameras ,records latitude, longitude, altitude, heading and Coordinated Universal Time (UTC) to your photographs. The GPS information will be directly embedded into the EXIF of pictures took by its compatible cameras.
Highlights
· Fixed spiral connection cable
The big difference of Geotagger N3 is the fixed connection cable design, each mode is specially for one type connection port. The spiral cable is soft and can be extended.
· 3 aixs electronic compass
The big advantage of the GPS receiver is its built in 3 axis electronic compass. The difference between 3 axis compass and normal compass is its accuracy.
· Advanced chipset of N3
Geotagger N3 is the most advanced Chipset MTK MT3329 which has 66 parallel searching and 22 tracking channels for a fast acquisition and reacquisition.
Meanwhile, geotagger N3 consumes less than 60mA from the camera and it also can be automatically powered up and powered down along with Nikon camera exposure meter, which making it one of the most power-efficient GPS receiver for Nikon cameras.
· Indoor fixed” function.
When you go indoor or to a place without GPS signal or GPS got blocked out , N3 will automatically reuse the last known position for tagging the subsequent images.
· Unique “wake up and sleepping” working mode.
The Geotagger N3 is powered from Nikon camera directly. A special work mode applied for low power consumption and maximum latest GPS data using. Even on the status of camera’s off, This working mode enable “camera off and GPS stays on ” which is very convenient for photographer. Under that circumstance, photographer is able to gain much more new GPS data.
· Support remote controller.
Supplied 2.5 jack remote pass-through allows you to use the remote trigger when the Nikon camera remote port is used by Geotagger N3.
owenryan15 